Complete Welding & Metal Shop Dispersal
Saturday April 2, 2022 10:00 am
24487 Regal Drive Abingdon, Va 24211
About the Auction
Numerous welders and supplies. New metal stock, tools, industrial metal working equipment, aluminum, multiple hoist and beams and much more. 160+ items, pallet lots and bins selling.
Directions: I-81 Southbound, take Exit 19, turn left. Go approximately 1 mile and turn right onto Regal Drive. Auction will be on the right.
Terms: 10% buyer premium added to final price. Cash, good check & cards accepted. 3% fee for use of card.
Inspection: Viewing starting at 9:00 a.m on day of auction.
Announcements made day of sale take precedence over all printed materials.
- Airco Dip-Cor 300 amp with wire feeder, 208/230/460 single phase, Airco push type wire feeder, gas regulator/flow meter, Airco pull type wire feeder, Tweco mig gun
- Lincoln high frequency with tig torch
- Hobart 300 amp AC/DC straight DC reverse, 230/460 single phase, with leads
- Miller 400 DC three phase, constant voltage with wire feeder, Tweco wire gun, leads, gas regulator, mounted on cart.
- Miller dial ARC high frequency welder, 208/240,460 single phase, tig torch with foot pedal, gas flow gauge, radiator cooling system, mounted on cart.
- Airco 250 amp constant voltage, 208/230/460 three phase, Airco pull type wire feeder for aluminum, Airco pull type wire feeder, gas regulator, mounted on cart.
- Hypertherm Plasma Cutter, Powermax 65, consumables, on roll cart.
- Thermal Dynamics Pak Master 100 XL, single phase 208/240, consumables.
- Hobart 400 amp AC/DC 230/240 single phase, high frequency box, tig torch and leads, Barnard cooling system, gas regulator, all mounted on cart with bottle rack.
- Airco 250 amp constant current, 208/240/460 three phase, push type wire feeder, with spot weld timer, single phase remote feeder with long leads, mounted on separate carts, Tweeco wire feeder gun, and feed rollers.
- Airco Model CV-300, 208/230/460 three phase, mounted on cart, remote wire feeder mounted on cart with long leads and gas regulator.
- Airco “Dip cor” 300 welder, 208/230/460 single phase, pull wire feeder, mounted on roll cart.
Metal working machines
- Heavy metal roll machine 5′ long x 6″ rolls, three phase
- Hamilton Machine Company engine lathe, three jaw chuck, steady rest, miscellaneous accessories.
- Vertical band saw, Rockwell Delta, three phase.
- Horizontal Johnson Band Saw, 1 hp, three phase.
- Jet Drill Press, 12 speed, 1 hp, single phase.
- Cincinnati Drill Press, single spindle 6 morse taper, three phase.
- Drill press with double spindle 6, morse taper, three phase.
- Single spindle drill press, gear drive, Garvin machine, three phase.
- Chicago heavy hand brake, size 812, has reinforcement bar included.
- Chicago 12 speed drill press, 120 volt.
- Piranha P3 IronWorker, 18 sets of punch and dies, angle cutter, plate cutter, notcher, rod cutter, three phase.
- Piranha P3 Ironworker, Bending head with bottom die, plate cutter, rod cutter, angle cutter, notching head, three phase.
- 6″ pedestal grinder 1/2 hp single phase 120volt.
- Vertical belt sander, 2″ belts, three phase.
- 8″ pedestal bench grinder, 3/4 hp, single phase, 120 volt.
- Continental Shop press, 30 ton, CP-100.
- Dayton heavy duty porta power, 3 pieces included.
- Various size “C” clamps on skid.
- Manual hand rail coping notcher, Julius Blum Company.
- William Barker metal shaper, three phase.
- Vertical foot power corner notcher.
- Hydraulic conduit/pipe bender with dies, single phase, 120 volts, several dies.
- Paslode nail gun, air powered.
- Hydraulic press, three phase.
- Magnetic frame drill, 120 volt, needs cord repair.
- Large hand clamps.
- Small hand clamps.
- Various post jacks.
- Craftsman tool cabinet and box, with various tools.
- Metal roll carts.
- Bar clamps.
- Bar clamps, 3′ size
- Electric hoist (front of ironworker) needs repair.
- Electric hoist (near steel racks) works perfectly.
- Electric hoist (near press brake) works only in one direction.
- Large Mechanical Press Brake, size 10′, various bending dies.
- 1/2″ plate Shear with additional blade in box.
Hand Tools and items
- Chip hammer
- wire brushes
- 8 piece socket set, 2 1/16 – 2 1/2, non impact, 1″ drive.
- Adjustable angle protractor.
- 6 piece 1 1/4 – 1 5/8 impact 3/4″ drive socket set
- 10 piece socket set 3/8″ and 1″ deep impact, 1/2 drive trammel points
- Cast iron welding jig table
- Sand blaster (red)
- 58. motorized bed
- 59. Murray 22″ push mower
- Casters, straight and swivel.
- 61. School desk wooden
- two 3′ sections of 8″ Tempco stainless steel flue liner
- two electric trailer lights with back plates and magnets.
- Various trailer hitches.
- Pipe fittings- threaded and 3000 pound socket weld fittings.
- Conduit fittings.
- Safety pallett with guardrails
- 7’ft x 9″ walk boards
- Diesel fuel jugs
- Large floor jacks
- Floor post with wheels (6 ton) RS 658 51″ minimum/ 84″ max, yellow
- Trailer divider (8′ wide)
- Short adjustable post
- Four adjustable screw type floor post
- Ford double flow 10-454
- Coal stoker gearbox with auger and combustion air fan
- ” tooth bar for bucket
- Columbus McKinnon Series 662 crane, drive motor, steel beams, and accessories.
- Jet 3 ton gear chain hoist (green)
- 1/2″x6″ rubber roll estimated 30 feet
- two buckets of used clamps, hold down type
- four 4’ft stands
- one 2’ft stand
- Beckett oil burner
Electrical switches and transformers
- Cutler Hammer 200 amp three phase disconnect, 600 volt, 100 hp
- Square D 400 amp
- FPE 60 amp, 600 volt, three phase
- Jefferson power former, 750, single phase, high voltage 220/480, low voltage 120/240, dry type transformer.
- Metl wireway tray with cover, 4’ft long.
Hoist, Pumps, Hoses, Cylinders
- P&H 2000 lbs zip lift, three phase, (yellow)
- Wright 3 ton, manual hoist
- 1/4 ton Comet hoist three phase
- Yale hoist (green)
- Gas boy hand pump
- Palet Hydraulic cylinders
- Misc. hydraulic hoses
- Air cylinders
- Bldor 20 hp, three phase, with pump and tank.
- Two- Torit dust collectors model 81, single phase, with bags.
- three- 4 drawer file cabinets
- one- 5 drawer file cabinet
- roll cabinet with bolts and nuts
- pallet of various electric motors, various sizes and voltages
- roll duct canvas connection
- Gear reduction
- antique Singer sewing machine model 31-14
- wall lockers
- metal cabinets
- Galaxy tire size 22.5x11r
- ten- 1 pound rolls 5356 HP 3/64
- seventy two- 1 pound rolls ER 4043 3/64 (18 rolls per box)
- Aluminum filler rods
- mild steel welding wire size .023
- flux core stainless wire
- 316-L stainless steel flux core
- two- 50 pounds box of Lincoln 5/32 welding rods
- tungsten gas cups
- dry tig torch
- A-36 flat bar various sizes, 3878 pounds
- A-36 flat bar cut pieces, various sizes, 2059 pounds
- two-Cold roll bar 5/16, 12’ft
- seven- 1/4″ bar, 12’ft
- one- 1/2 bar, 12’ft
- one- 1 1/2 bar, 12’ft
- one- 1 5/8 x 1 5/8 square bar 8’ft
- one- 5/16 x 5/16 square bar 9’ft6″
- 121 thru 126 cold roll steel totals 231 pounds
- Round stock cold roll, various sizes and various lengths, lots of new stock in 20’ft lengths, total weight of 751 pound Flat sheets A-36 steel
- eight- 12 gauge, 48″x 120″x 105
- one- 7 gauge, 60″x120″x.187
- seven- 8 gauge, 60″ x 120″ x160
- one- 8 gauge, 48″ x 96″
- two- 11 gauge, 48″ x 96″
- 128 thru 132 flat sheets total 4716 pounds
Tread Plate A-36
- one-1/8″ 48″x96″ (197 lbs)
- one- 1/8″ 36″x48″ (74 lbs)
Metal Channel A-36
- one- C 3×4 , (20’ft)
- four- 1 1/2 x 1/2 (20′)
- three- 4×5 (20′)
- 3×4 x 6′ cut piece
- 1 1/2 x 1/2 x 7′
- 1 1/2x 1/2 x 13′
- 1 x 1/2 x 8′
- 8 x 18.75 x 16′
- total channel weighs 852 pounds
- Angle A-36 , lots of new stock 20 feet length, various sizes, one- 3 x 3 x 1/2 piece 7′ long, all totaling 1110 pounds
- A-36 cut angle pieces, 5 x5 x 3/8, 3 1/2x 3 1/2 x 3/8, 4 x4 x1/4, all totaling 331 pounds
- A -36 steel tube, various sizes, various lengths
- Flat A-36, various sizes and various lengths
- I Beam, A-36, various lengths and various sizes
- aluminum angle, various lengths and various sizes
- aluminum square tube, various lengths and various sizes
- aluminum flat bar, various sizes and various lengths
- aluminum channel, various sizes and length
- aluminum “I” beam 1 1/2 x 2 1/2 , 20′ and 12 ‘ pieces
- aluminum “I” beam 2 5/8 x 4″, 9′ length
- 3×3 tube, 12′
- Bar gate, 36″x 1″ x 144″ aluminum
- 24″ x 60″ x 1/4 aluminum plate
- pallet of small pieces, flats, tubes, angles
- small work table
- welding table with vice, 8’ft long with drawers